Hardware Monitoring / lm-sensors

This board makes use of the w83627ehf driver, available via /sys/class/hwmon/hwmon0/device/.

As of kernel 2.6.19-rc2-git3 all 5 fan speeds can be accessed. Earlier kernels only reported 4 of the 5 fan speeds and required a patch for fan5.

Rudolf Marek wrote an experimental driver (md5) to read out the CPUs core temperatures (aka coretemp). Just run compile.sh to create the driver.

After modprobing the module, you can read the core temperature from /sys/class/hwmon/hwmon1/device/temp1_input and /sys/class/hwmon/hwmon2/device/temp1_input

The coretemp driver, and a lot more work on the w83627ehf driver is courtesy of Rudolf Marek, Jean Delvare and David Hubbard of the lm-sensors project!

Please Note: The above patch should apply cleanly against kernel 2.6.18-mm[1-3]

Snapshot of ksensors: